1/4 DIN panel mount pH controller microprocessor based with membrane type keypad and password protection. Meter has a programmable, reversible and isolated pulse frequency output and dual SPDT relays. Connectors are BNC and spade lug terminal blocks. ATC is a 10K thermistor or simulation resistor. Features a NEMA-4 type bezel for watertight seals against mounting panels. 115/230V AC.
- Reversible pulse frequency output proportional to ion concentration
- Set point security code protection
- Dual output relays
- Automatic/manual temp. compensation
- Dual output relays
- Automatic/manual temp. compensation
- User programmable buffer recognition or pre-stored nbs buffers
- Low drift & high stability
- User friendly keypad format
- CE approved version available
- Power down memory backup
- 1/4 DIN housing
- User programmable relay hysteresis
- Nema 4 bezel
Specifications
-
Range Resolution Accuracy pH -2.00 to 16.00 pH 0.01 pH ± 0.01 pH ORP -1999 to 1999mV 1 mV ± 0.1% Temp. -3.0 to 115.0 °C 0.1 °C ± 0.2 °C -
General
- Input impedance: >10exp(13) ohms
- Temp. compensation: Auto/manual 0 to 115.0 °C
- Electrode buffer recognition: 4.00,6.86,& 10.01
- Single point standardization: Eliminates electrode offset
- Dual point standardization: Calculates/compensates for electrode solpe & offse
- Bumpless calibration: Controller output does not change during calibrati
- Display: 0.5 inch high LCD
- Lock: Set values connot be changed duless lock code is e
- Relay set point hysteresis: User programmable
- Relay output (resistive load): 5amp. at 115 VAC, 2.5 amp. at 230 VAC
- CE certification: Effective january, 1998
- NEMA 4: Front of the mounting panel
- Power failure backup: Yes
- Dimensions: 1/4 DIN case
- Weight: 680 g
- Power source: 115 VAC, 230 VAC ± 15% 50/60 hz
Be the first to review “1/4 DIN panel mount pH controller”