Certified thickness standards are ideal for checking calibration and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. All standards described below are supplied with a certificate of calibration showing traceability to NIST/NPL. |
Calibration Standards |
Ideal for use in the calibration lab Used to verify the accuracy of a magnetic, eddy current or ultrasonic coating thickness gage over its complete thickness measuring range Standards with steel or aluminum substrates consist of four (4) standards mounted in a durable leatherette binder Plastic thickness standards consist of four (4) polystyrene standards supplied in a rugged acrylic storage box |
Check Standards |
Ideal for use in the field or on the factory floor Each set consists of three (3) test standards; one zero (uncoated) and two (2) epoxy coated at high and low thicknesses Available with either a ferrous substrate for use with magnetic type coating thickness gages, or a non-ferrous substrate for use with eddy current type gages Mounted in durable leatherette binder |
Calibration Standards and Check Standards are ideal for use with magnetic, eddy current and ultrasonic coating thickness gages. |
Select the Calibration or Check Standard that most closely matches the range of your gage. |
PosiTector | Ideal for | Approximate Thickness | Coating/ Substrate |
Accuracy | ||||||
Plate 1
|
Plate 2
|
Plate 3
|
Plate 4
|
|||||||
C A L I B R A T I O N S T A N D A R D S |
CAL – S1 | PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, SPFS PosiTest FM & F |
0
|
3 mils
75 um |
10 mils
250 um |
60 mils
1.5 mm |
Epoxy on Steel (Ferrous) |
± 0.01 mil ± 0.25 um |
||
CAL – S2 | PosiTector 6000 F0S, F45S, F90S PosiTest DFT Ferrous & Combo |
0
|
3 mils
75 um |
10 mils
250 um |
20 mils
500 um |
|||||
CAL – S3 | PosiTest GM & G PosiPen A, B & C |
0
|
0.25 mils
6 um |
0.75 mils
20 um |
3 mils
75 um |
|||||
CAL – A1 | PosiTector 6000 N ,NS, NRS, FN, FNS, FNRS |
0
|
3 mils
75 um |
10 mils
250 um |
60 mils
1.5 mm |
Epoxy on Aluminum (Non-Ferrous) |
± 0.01 mil ± 0.30 um |
|||
CAL – A2 | PosiTector 6000 NAS , N0S, N45S, N90S PosiTest DFT Combo |
0
|
3 mils
75 um |
10 mils
250 um |
20 mils
500 um |
|||||
CAL – A3 | PosiTector 100 B |
3 mils
75 um |
5 mils
125 um |
10 mils
250 um |
20 mils
500 um |
|||||
CAL – A4 | PosiTector 200, 200 B |
2 mils
50 um |
5 mils
125 um |
10 mils
250 um |
20 mils
500 um |
|||||
CAL – P1 | PosiTector 6000 FT, FTS, NTS, FNTS |
15mils
375 um |
80 mils
2 mm |
185 mils
4.5 mm |
250 mils
6.5 mm |
Polystyrene Blocks |
± {0.1 mil + 0.05% of thickness) ±(2.5 um + 0.05% |
|||
CAL – P2 | PosiTector 6000 FHS, NHS, EOC |
100mils
2.5 mm |
250 mils
6.5 mm |
500 mils
13 mm |
750 mils
19 mm |
|||||
CAL – P3 | PosiTector 100 C |
15mils
325 mm |
60 mils
1.5 mm |
100 mils
2.5 mm |
185 mils
4.5 mm |
|||||
CAL – P4 | PosiTector 100 D |
60mils
1.5 mm |
100 mils
2.5 mm |
185 mils
4.5 mm |
250 mils
6.5 mm |
|||||
CAL – P5 | PosiTector 6000 FKS, NKS |
60 mils
1.5 mm |
100 mils
2.5 mm |
250 mils
6.5 mm |
580 mils
12 mm |
|||||
CAL – P6 | PosiTector 200 C |
15 mils
375 um |
60 mils
1.5 mm |
100 mils
2.5 mm |
125 mils
3 mm |
|||||
C H E C K |
CHK – PF1 | PosiTector 6000 F, FS, FRS, FN, FNS, SPFS, F0S, F45S, F90S PosiTest FM & F, DFT Ferrous & Combo |
0
|
2 mils
50 um |
20 mils
500 um |
—
|
Epoxy on Seel (Ferrous) |
± 0.01 mil ± 0.25 um |
||
CHK – PN1 | PosiTector 6000 N ,NS, NRS, FN, FNS, FNRS, NAS, NOS, N45S, N90S PosiTest DFT Combo |
0
|
2 mils
50 um |
20 mils
500 um |
—
|
Epoxy on Aluminum (Non-Ferrous) |
± 0.01 mil ± 0.30 um |
All standards above are supplied with a certificate of calibration showing traceability to NIST/NPL |
Be the first to review “Calibration Standards”