The feature-packed 424D distance meters measures up to any situation.
- Measures up to 100 m (330 ft)
- Higher accuracy: +/-1 mm (0.04 in)
- 4-line display shows you even more data at a glance
- Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked by an obstacle
- Corner angle feature, allows you to determine the angle of a corner
- Compass provides a “heading” for your distance measurements
- Stores 20 complete displays for quick recall
- Backlight
- Tripod mode allows you to mount the meter to a tripod when measuring long distances
- Full Pythagoras function for height measurements
- Audible keypad feedback
- Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
- Automated End-piece Correction for measuring from an edge or corner – a built-in sensor detects the position of this bracket and automatically changes the reference point
- Minimum/Maximum function
- Enhanced environmental protection: IP54-rated as dust and water spray resistant
- Improved battery life of 5000 measurements with auto shut-off feature
Like all the new Fluke Laser Distance Meters, the 424D offers instant, one-button measurements of the distance between two objects with:
- Easy targeting with bright laser
- Quick calculations of area (square feet/meters) and volume
- Easy-to-use addition and subtraction function
All meters offer:
- Reduction of estimation errors, saving both time and money
- The most advanced 2 laser technology for distance measurement
- Instant measurement with one-button operation
- Easy addition and subtraction function
- Quick calculation of area (square footage) and volume
- Easy addition and subtraction of measurements
- Minimum/maximum function
- Improved battery life from automatic shut-off feature
- Pythagoras calculation for determining distance indirectly from two other measurements
- Pouch with Fluke logo
- Three-year warranty
The 424D additionally offers:
- Improved visibility with backlit screen
- Ability to measure up to 100 m (330 ft)
- Tripod mode allows you to mount to a tripod for measuring long distances
- Stake out function
- Enhanced Pythagoras calculation for determining distance indirectly from three other measurements
- Audible keypad feedback
- Storage of the last twenty measurements for quick recall of distance
- Strong environmental protection with IP54 (water spray and dust proof) sealing
- Inclination sensor for taking measurements in hard to reach areas
- Compass provides a “heading” for distance measurement
- Automated end-piece correction: when measuring from an edge or corner, a built-in sensor detects the position of this bracket and automatically changes the reference point
Distance Measurement | |
Typical measuring tolerance [1] | ± 1.0 mm [3] |
Maximum measuring tolerance [2] | ± 2.0 mm [3] |
Range At Leica Target Plate GZM26 | 100 m / 330 ft |
Typical range [1] | 80 m / 260 ft |
Range at unfavorable condition [4] | 60 m / 195 ft |
Smallest unit displayed | 6 / 30 / 60 mm (10 / 50 / 100 m) |
Ø Laser point at distances | 6 / 30 / 60 mm (10 / 50 / 100 m) |
Tilt Measurement | |
Measuring tolerance to laser beam [5] | ± 0.2° |
Measuring tolerance to housing [5] | ± 0.2° |
Range | 360° |
General | |
Laser cass | 2 |
Laser type | 635 nm, <1 mW |
Protection class | IP54 |
Automatic laser off | After 90 seconds |
Automatic Power Off | After 180 seconds |
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 | Up to 5,000 measurements |
Size (Length x Width x Depth) | 127mm x 56mm x 33mm |
Weight (with batteries) | 158 g |
Temperature range Storage operation |
-25 °C to +70°C (-13 °F to +158 °F) |
-10 °C to +50 °C (14 °F to +122 °F) | |
Calibration cycle | Tilt and compass |
Maximum altitude | 3000 m |
Maximum relative humidity | 85% at 20 °F to 120 °F (-7 °C to 50 °C) |
Safety | IEC Standard No. 61010-1:2001 |
EN60825-1:2007 (Class II) | |
EMC | EN 55022:2010 |
EN 61000-4-3:2010 | |
EN 61000-4-8:2010 |
[1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C.
[2] Applies for 10 to 500 % target reflectivity, high background illumination, -10 °C to +50 °C.
[3] Tolerances apply from 0.05 m to 10 m with a confidence level of 95 %. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
[4] Applies for 100 % target reflectivity, background illumination between 10’000 lux and 30’000 lux.
[5] After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.
Be the first to review “FlukeView Forms with Cable”