Ordering information
FLK-Ti32 9 Hz Industrial-Commercial Thermal Imager, 9 Hz FLK-Ti27 60 Hz Industrial-Commercial Thermal Imager, 60 Hz Included: Thermal imager with standard infrared lens; ac power supply and battery pack charger (including mains adapters); two, rugged lithium ion smart battery packs; SD memory card; multi-format USB memory card reader for downloading images into your computer; SmartView® software with free software upgrades for life; rugged, hard carrying case; soft transport bag; adjustable hand strap; printed users manual; warranty registration card. Op FLK-LENS/TELE1 Telephoto Infrared Lens TI-CAR-CHARGER Thermal Imager Vehicle Charger TI-VISOR Thermal Imager Visor BOOK-ITP Introduction to Thermography Principles Book TI-TRIPOD Tripod Mounting Base Accessory General specifications Operating temperature -10 °C to +50 °C (14 °F to 122 °F) Storage temperature -20 °C to +50 °C (-4 °F to 122 °F) without batteries Relative humidity 10 % to 95 % non-condensing Display 9.1 cm (3.7 in) diagonal landscape color VGA (640 x 480) LCD with backlight and clear protective cover Controls and adjustments
User selectable temperature scale (°C/°F) Software SmartView® full analysis and reporting software included Batteries Two lithium ion rechargeable smart battery packs with five-segment LED display to show charge level Battery life Four+ hours continuous use per battery pack (assumes 50 % brightness of LCD) Battery charge time 2.5 hours to full charge AC battery charging Two-bay ac battery charger (110 V ac to 220 V ac, 50/60 Hz) (included), or in-imager charging. AC mains adapters included. Optional 12 V automotive charging adapter. AC operation AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz). AC mains adapters included. Power saving Sleep mode activated after five minutes of inactivity, automatic power off after 30 minutes of inactivity Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01 Electromagnetic compatibility Meets all applicable requirements in EN61326-1:2006 C Tick IEC/EN 61326-1 US FCC CFR 47, Part 15 Class B Vibration 0.03 g2/Hz (3.8 grms), IEC 68-2-6 Shock 25 g, IEC 68-2-29 Drop 2 meter (6.5 feet) with standard lens Size (H x W x L) 27.7 cm x 12.2 cm x 17.0 cm (10.9 in x 4.8 in x 6.7 in) Weight (battery included) 1.05 kg (2.3 lb) Enclosure rating IP54 (protected against dust, limited ingress; protection against water spray from all directions) Warranty Two-years (standard), extended warranties are available. Recommended calibration cycle Two-years (assumes normal operation and normal aging) Supported Languages Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish |
Fluke Ti27 Industrial Thermal Imager / Infrared Camera
- Temperature measurment range -20°C to +600°C (-4°F to +1112°F)
- Temperature measurement accuracy ± 2°C or 2% (at 25°C nominal, whichever is greater)
- Emissivity correction, reflected background temperature compensation, transmission correction
- Image capture frequency 60 HZ and 9 HZ models
- Detector type, Focal Plane Array, uncooled Microbolometer, 240 x 180 pixels
- Thermal sensitivity (NETD) ≤0.05° at 30° target temp. (50 mK)
- Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2) on imager
- Palettes 8 standard, 8 Ultra Contrast
- High-temperature alarm (user-selectable)
- Two lithium ion rechargeable smart batteries
- 4+ hours continuous use per battery pack
- 2 meter (6.5 ft.) drop test with standard lens
Fluke Ti29 Industrial Thermal Imager / Infrared Camera
- Temperature measurment range -20°C to +600°C (-4°F to +1112°F)
- Temperature measurement accuracy ± 2°C or 2% (at 25°C nominal, whichever is greater)
- Emissivity correction, reflected background temperature compensation, transmission correction
- Image capture frequency 60 HZ and 9 HZ models
- Detector type, Focal Plane Array, uncooled Microbolometer, 280 x 210 pixels
- Thermal sensitivity (NETD) ≤0.05° at 30° target temp. (50 mK)
- Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2) on imager
- Palettes 8 standard, 8 Ultra Contrast
- High-temperature alarm (user-selectable)
- Two lithium ion rechargeable smart batteries
- 4+ hours continuous use per battery pack
- 2 meter (6.5 ft.) drop test with standard lens
Fluke Ti32 Industrial Thermal Imager / Infrared Camera
-
The Ti32 delivers the crisp, clear images with its 320 x 240 resolution detector.
-
An Industry leading 50mk (.05C) thermal sensitivity (NETD).
-
Automatic alignment of infrared and visual images with patented Fluke IR Fusion.
-
The most affordable optional wide angle and telephoto lenses on the market.
-
Interchangeable litheon ion batteries
-
600C temperature range
-
6.5 ft drop rating
-
2 year warranty
Be the first to review “LED Voltage and Continuity Tester”