YSI 5914 Cap Membrane Kit 2.00 Mil PE(6 each), includes electrolyte (blue cap) Subtotal: $15.39
Megger DPM1000 Power Clamp Meter
$475.00
Key features
- AC/DC Voltage to 1000V
- AC/DC Current to 1000A
- True RMS
- Resistance 100kΩ
- LCD Display
- Phase rotation indication
- Inrush peak current
- Auto backlight display
- Frequency measurement
- Capacitance measurement
- Power Factor Measurement
- Watt measurement to 1MW
- Harmonic measurement
- Harmonic distortion
- Diode test
- Non-contact volt alert
- Continuity Beeper
- Data Hold/Min-Max/Peak Hold
- Bright LED torch
- Temperature to 1000° C
- Carrying holster/pouch
- CAT IV 600V Rating
- Bluetooth/Megger LinkTMAPP
- Supplied with carry case
Megger DPM1000 Power Clamp Meter
The new Megger DPM1000 Power Clamp meter combines the functionality of power meter, harmonics meter and data logger in one easy to use package. The design meets the requirements of BSEN 61010-1 CAT IV 600V for supply side applications. A large backlit LCD clearly displays all measurements that turns on at the touch of a button or when rotating the selection dial. It also automatically switched off to save battery consumption.
The DPM1000 can measure DC, AC, pulsed and mixed currents up to 1000 A simply by clamping the jaws around the appropriate conductor, whilst voltages up to 1000 V AC or DC may be measured by the supplied test leads, Where power measurements are to be made both techniques above are performed simultaneously. All power related parameters including energy consumption, frequency, total harmonic distortion, distortion factor and capacitance. It features auto-ranging and has 3 phase rotation indication.
The DPM1000 measures Single and 3 phase active power and power factor, the harmonic content of the signal, up to the 25th harmonic can be displayed. Temperature measurements can be made up 1000°C using the thermocouple provided.The DCM1000 is ideally suited to measuring mains power quality and applications in the development, installation, maintenance and repair of equipment and devices used in power electronics and power engineering. The unit has an internal torch that lights during the operation of the clamp and automatic non-contact voltage detection for identification of live circuits.
The DPM 1000 may be used to perform data logging to its internal non-volatile memory. You can record a maximum of 9999 readings/records to the memory over a period of time and download the data to produce graphs and reports. The record rate can be set from 1 sec to 600 sec. The accuracy of the timer is within 3 seconds per hour.
The meter uses low-power Bluetooth v4.0 wireless technology to transfer real-time data to the free Megger LinkTM app, available for both iOS and Android. The maximum communication range in open air is approximately 10 m. This function is invalid for Inrush and Phase Rotation.
The DPM1000 is supplied complete with test leads and Thermocouple Probe in full sized carry case.
- AC/DC voltage and current measurment
- Harmonic measurment and distortion
- Power factor measurement
- Watt measurment to 1MW
- Compatible with Megger Link app
What’s included
- Megger DPM1000 power clamp meter
- Lead set
- Carry case
Megger DPM1000 Power Clamp Meter Technical Specifications
| ACA Range | 100A – 1000A | |
| Resolution | 0.01A | |
| Basic Accuracy | ± (1.5% +5d) at 50-500Hz | |
| Conversion Type | AC+DC True-RMS | |
| ACV Range | 100V-1000V | |
| Resolution | 0.01V | |
| Basic Accuracy | ± (1.5%+5d) at 50Hz~500Hz | |
| Input Impedance | 3.5MΩ | |
| Overload Protection | 1000V rms | |
| DCA Range | 100A – 1000A | |
| Resolution | 0.01A | |
| Basic Accuracy | ± (1.5% +5d) | |
| DCV Range | 100V~1000V | |
| Resolution | 0.01V | |
| Basic Accuracy | ± (0.7%+2d) | |
| Input Impedance | 3.5MΩ | |
| Overload Protection | 1000V rms | |
| AC+DCV Range | 100V~1000V | |
| Resolution | 0.01V | |
| Basic Accuracy | ± (1.7%+7d) | |
| Input Impedance | 3.5MΩ | |
| Overload Protection | 1000V rms | |
| Watt | 10KW~1MW | |
| Resolution | 1W | |
| Power Factor | -1.00 ~ 1.00 | |
| Resolution | 0.01 | |
| Basic Accuracy | ± 5d | |
| T.H.D | 0.1% ~100% | |
| Resolution | 0.1% | |
| Basic Accuracy | ± (3.0%+10d) | |
| Harmonics | 0.1% ~100% | |
| Resolution | 0.1% | |
| Basic Accuracy | ± (5.0%+10d) For order 1-12 | |
| ± (10.0%+10d) For order 13-25 | ||
| Resistance | 1kΩ – 100kΩ | |
| Resolution | 0.01Ω | |
| Basic Accuracy | ± (1.0% + 5dgt) | |
| Overload Protection | 1000V rms | |
| Continuity Beeper | <30Ω, 2.KHz tone buzzer | |
| Diode Test | Open Circuit Voltage | ± 1.8 V max |
| Capacitance | 4µF – 4000µF | |
| Resolution | 1nF | |
| Basic Accuracy | ± (1.9%+8d) | |
| Overload Protection | 1000V rms | |
| Frequency Counter | 20.00Hz ~ 10.00KHz | |
| Resolution | 0.01Hz | |
| Accuracy | ± 0.5%+3d | |
| Temperature | -50°C ~1000°C | |
| Resolution | 0.1°C | |
| Accuracy | ± (1.0%+3°C) | |
| Overload Protection | 1000V rms | |
| Sampling Rate | 3times/sec | |
| Overload Indication | “OL” or “-OL” | |
| Low Battery Indication Auto Power Off |
15 Minutes | |
| Operating Temperature | 0°C~50°C, ≦80% RH | |
| Storage Temperature | – 10°C ~ 50°C | |
| Temperature Coefficient | 0.2 x (Spec. Acc)/°C, <18°C or>28°C |
|
| International Standard | IEC/EN 61243-3:2014 | |
| Safety Standard | IEC 61010-1, Designed to meet UL61010 Spec CAT IV 600V, CAT III 1000V |
|
| Maximum Conductor Size | 40mm | |
| Maximum Busbar Size | 61 x 12mm | |
| Power Requirement | AAA Size Battery 1.5V x 6 | |
| Battery Life in hours | 50 | |
| Size | 103mm(W) x 258mm (L) x 55mm(H) |
|
| Weight: (with battery) | 600g | |
Specification Pdf
| Weight | 0.600 kg |
|---|
Brand
Megger
Welcome to Megger Catalog
Megger has been the premier provider of electric test equipment and measuring instruments for electrical power applications for over 100 years. Now Named Megger, the company was previously called Avo International, Avo Biddle, and Biddle Megger before renaming it simply Megger today. The trademark was first registered in May 1903 and is jealously guarded by the company. Although we're best known for our world famous range of insulation testers, Megger provides a full service solution to meet your electrical test and measurement needs. Our products provide testing solutions in the most critical maintenance areas including cable fault locating, protective relay testing, on-line monitoring of substation apparatus, and power quality testing. With such a diverse product offering, we are the single source for electrical test and measuring instruments. See Complete Megger Catalog in PDF format.
Reviews
There are no reviews yet.
Related products
Other
$340.00
$269.00
Other
$189.00
Other
$4,350.00
Other
$66.00
Sale!
Original price was: $720.00.$684.00Current price is: $684.00.
Other
$150.00
$215.00
Other
$1,275.00
$70.00
Other
$37.00
Be the first to review “Megger DPM1000 Power Clamp Meter”