HI 93102
Complete Instrument for Turbidity, Cyanuric Acid, Bromine, Chlorine, Iron, Iodine and pH
The most important parameters needed for water analysis, especially in drinking water are now available in a portable meter.
You can obtain lab performance in the field by using the HI 93102.
It not only measures turbidity, but also pH, total and free chlorine, bromine, iodine, iron and cyanuric acid (CYS).
All this in the palm of your hand and in seconds!
Measurements are made quickly and repeatedly through a sophisticated, yet easy-to-use microprocessor.
In colorimetric mode, users can select between factory preprogrammed calibration or calibrating the meter on their own, and measure either concentration or relative absorbance of the sample.
Up to 25 measured samples can be stored in memory together with time and date.
Order Information:
HI 93102 is supplied with glass cuvet, batteries and instructions.
- Specifications
- Accessories
- Downloads
Range | Turbidity | 0.00 to 9.99 FTU; 10.0 to 50.0 FTU |
Range | Bromine | 0.00 to 8.00 mg/L |
Range | Free & Total Chlorine | 0.00 to 2.50 mg/L; 0.00 to 3.50 mg/L |
Range | Cyanuric Acid | 0 to 80 mg/L |
Range | Iodine | 0.0 to 12.5 mg/L |
Range | Iron LR | 0.00 to 1.00 mg/L |
Range | pH | 5.9 to 8.5 pH |
Resolution | Turbidity | 0.01; 0.1 FTU |
Resolution | Bromine | 0.01 mg/L |
Resolution | Free & Total Chlorine | 0.01 mg/L |
Resolution | Cyanuric Acid | 1 mg/L |
Resolution | Iodine | 0.1 mg/L |
Resolution | Iron LR | 0.01 mg/L |
Resolution | pH | 0.1 pH |
Accuracy | Turbidity | ±0.5 FTU ±5% of reading |
Accuracy | Bromine | ±0.08 mg/L ±3% of reading |
Accuracy | Free & Total Chlorine | ±0.03 mg/L ±3% of reading |
Accuracy | Cyanuric Acid | ±1 mg/L ±15% of reading |
Accuracy | Iodine | ±0.1 mg/L ±5% of reading |
Accuracy | Iron LR | ±0.02 mg/L ±3% of reading |
Accuracy | pH | ±0.1 pH |
Calibration | 2 points, selectable between 0.00 – 50.0 FTU (0.00 and 20.0 FTU recommended) |
|
Light Source | Green LED | |
Light Life | life of the instrument | |
Light Detection | 2 Silicon Photocells | |
Battery Type / Life | 4 x 1.5V AA / approx. 60 hours of continuous use or 1000 measurements; automatic shut-off after 10, 20, 30, 40, 50 or 60 minutes (User-Selectable) |
|
Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing | |
Dimensions | 220 x 82 x 66 mm (8.7 x 3.2 x 2.6") | |
Weight | 510 g (1.1 lb.) |
Be the first to review “Multiparameter Meter for water Analysis”