-
DTX significantly reduces total certification costs up to 33% a year
-
The most used and trusted tester- over 1 billion copper links certified to date
-
Independently verified by ETL to meet ISO Level IV and TIA Level IIIe Accuracy requirements
-
Analyze test results and create professional test reports using LinkWare reporting software
-
Endorsed by over 20 cable companies worldwide
-
Perform Basic fiber certification five times faster with DTX Fiber Modules
-
Perform Extended fiber certification
The DTX CableAnalyzer Series from Fluke Networks is the testing platform for today and tomorrow. This revolutionary new future-proof platform significantly reduces total time to certify by improving every aspect of the testing process.
It starts with 9-second Cat 6 Autotest. That means you can meet TIA-568-C and ISO 11801:2002 certification requirements and receive structured cabling warranties faster than ever before. With all this speed also comes the highest accuracy as the DTX is the only tester to use a standards-compliant, electrically-centered permanent link test adapter. Furthermore, the DTX-1800 truly delivers on the promise of a futureproofing investment by measuring 10 Gig cable performance and Alien Crosstalk (ANEXT and AFEXT) in full compliance with the industry standards to 500 MHz. The AC Wiremap feature validates for Power over Ethernet services in accordance with TIA/EIA standards, even if a Midspan power supply is used. With over 40,000 units in use today, the DTX Series, is clearly the industry’s choice as the most trusted cable certifier.
See how far the right tool can take you – from 10 Meg to 10 Gig
The DTX 10 Gig over Copper Test Solution enables testing and certification of twisted pair cabling for 10 Gigabit Ethernet deployments – whether it is an existing Cat 6 or newly installed Augmented Cat 6 cabling system. The DTX 10 Gig over Copper Test Solution follows the DTX CableAnalyzer Series in our commitment to industry-leading performance, accuracy and ease-of-use.
The DTX 10 Gig over Copper Test Solution Advantage
- Simplifies complex Alien Crosstalk link-to-link certification by using the same user-friendly and intuitive DTX interface
- The only solution to identify problematic cable(s) within the same bundle due to link-to-link crosstalk
- The only solution that is fully compliant with industry standards
- DTX 10 Gig Copper Kit together with DTX-1800 delivers on the promise of a future-proof investment – measuring performance for 10 Gig and Alien Crosstalk (ANEXT and AFEXT) in full compliance with the industry standards to 500 MHz
The DTX 10 Gig Kit is now available.
DTX 10 Gig Kit
Alien Crosstalk Analyzer Kit for DTX-1800 includes: two DTX-AXTLK1 Communication Modules, Windows based DTX AxTalk Analyzer™ Software, two
Cat 6A/Class EA Permanent Link Adapters (DTX-PLA002S), two Channel Adapters optimized for Alien Crosstalk measurements to 500 MHz (DTX-CHA001AS), two Link Terminators (DTX-AXTERM) and two RJ45-to-RJ45 Couplers.
All items in this kit are packaged in a separate carrying case.
For an in-depth overview on the developments of the 10GBASE-T Standards including an overview on cabling types, best practices for design and installation and a technical look at Alien Crosstalk, download our whitepaper titled Testing Challenges for 10Gb/s Ethernet over Twisted-Pair Cabling (registration required).
Coax Test Solution
Test coax cable links quickly and easily with Coax Test Adapters
Extend the capabilities of your DTX CableAnalyzer to test coaxial cabling systems including legacy data cabling (such as 10BASE-2 or 10BASE-5 Ethernet) and video distribution coaxial cabling. Fluke Networks’ new Coax Test Adapters and software upgrades add the following coaxial cabling tests to your DTX CableAnalyzer:
- Length
- Propagation delay
- Cable (input) impedance
- Insertion loss as a function of signal frequency
Cable Impedance
The cable input impedance characterizes the cable to be the proper type of coaxial cable such as 75 Ω cable versus a 50 Ω cable used in legacy Ethernet systems or 93 Ω cable. In addition, the tester performs a Time Domain Reflectometry (TDR) test of the link to ensure that the cable does not exhibit any significant changes in impedance. Such impedance anomalies can cause significant problems in the quality of the signal transmission.
Propagation Delay
Propagation delay measures the time required for signals to travel from one end of the cabling link to the other. The NVP of the cable, which indicates the speed of the electrical signals on the cable, is used to convert the propagation delay into the "electrical length" of the link. If the NVP is known with sufficient accuracy, the electrical length approximates the physical length closely.
Insertion Loss
With the DTX Coax Test Adapters, the DTX-1800 measures the insertion loss of the coaxial cable over the frequency range from 1 through 900 MHzx. The DTX-1200 measures insertion loss over the range from 1 – 350 MHz with the coax adapters. The tester stores the sweep diagrams that can be uploaded and stored on a PC using the LinkWare software.
Record-fast fiber certification – from 10 Meg to 10 Gig
DTX CableAnalyzer – a platform for growth
The only cable tester that can completely certify copper and fiber cabling. Only the DTX platform offers optional on-board fiber modules for Basic (Tier 1) fiber certification and the DTX Compact OTDR module for Extended (Tier 2) certification.
We engineered DTX Fiber Modules and DTX Compact OTDR to accelerate testing through exclusive technology and an easy-to-use interface. Our fiber modules let you test more fibers in less time minimizing costs and freeing you up for other tasks. DTX Compact OTDR module speeds up Extended fiber certification and troubleshooting with unparalleled ease of use, wealth of installer-friendly features and the familiar user interface of the DTX CableAnalyzer. Over time, the savings are substantial – hundreds of hours per year for the average contractor.
Deliver complete fiber certification
Basic (Tier1) fiber certification. DTX Fiber Modules provide a Basic (Tier 1) fiber certification solution – loss, length and polarity. Validate fiber link performance per industry standards. Measure optical loss at multiple wavelengths, measure fiber length and verify polarity. You can test two fibers in both directions at both wavelengths with incredible speed without swapping main and remote units, a capability only available from Fluke Networks. Interchangeable connector adapters allow reference and test connections that meet TIA/ISO standards for most SFF (small form factor) fiber connectors.
Unlike competitive fiber adapters which measure length and two loss measurements per Autotest, DTX is the only fiber test solution that measures length and four loss measurements per Autotest – all in about 12 seconds. With DTX Fiber Modules, you can speed through fiber testing five times faster than the competition.
Extended (Tier 2) fiber certification. DTX Compact OTDR provides Extended (Tier 2) fiber certification. It shoots and analyzes traces on both multimode and singlemode fibers to check every connector and splice on a link making sure that it meets defined specifications and installation quality expectations.
Certify cabling, verify network availability and link connectivity
As network applications evolve and bandwidth demand increases, so do the testing requirements. Whether you are activating new service, upgrading new infrastructure, performing MACs, troubleshooting a cabling or link connectivity problems, new industry best practices now recommend verifying link connectivity and network availability after certifying each cabling link. They also recommend documenting results in one consolidated report. Doing so provides assurance to your customers that the network infrastructure was delivered in perfect working order. And the Fluke Networks DTX Series CableAnalyzer™ with the new DTX Network Service Module is the way to do just that.
Improve the services you offer
The same familiar tool used industry-wide to certify link transmission performance can now be used to verify and document the availability of network services over a cabling link. It is simple to operate and quickly provides powerful, valuable information. When you install new links and need to turn up the service the DTX tester with the Network Service Module lets you document all the network connectivity tests executed as an integrated part of the cable certification documentation provided by LinkWare. This allows you to provide clear evidence to your customers that the job was done right – according to standards and best practices. And, it lets you deliver improved services to end users, eliminate callbacks and reduce network downtime.
DTX Network Service Module:
- Verify network service availability – determine whether a telecom outlet is active, identify its data rate (10/100/1000 connection), duplex capabilities, and whether power is available for PoE.
- Check link utilization and error conditions – see Ethernet utilization of the link-under-test as a percentage of available bandwidth; identify broadcast traffic and the presence of networkerrors.
- Port identification – blink switch/hub port light; verify if link-under-test is connected to the proper port or find out where a work area outlet is connected.
- Verify link connectivity to the network up to 1 Gigabit Ethernet – use the DHCP server to getan IP address, ping the default router and DNS Server at 10, 100 or 1000 Mb/s. Or you can assign IP addresses manually to ping network devices.
- Verify PoE – verify availability and voltage levels for links connected to power sourcing equipment to supply powered devices (PDs) for Power over Ethernet applications such as VoIP, network cameras, and wireless LAN Access Points.
- Document both cabling link certification and network availability and link connectivity test results in one consolidated report using our LinkWare software.
- Troubleshoot link – determine whether performance problems are cabling or network-related.
900 MHz and Class F (Cat 7) manufacturer’s endorsements
The top-of-the-line DTX CableAnalyzer — the DTX-1800 — supports testing up to 900 MHz. This extended bandwidth supports the ISO Class F links, as well as emerging standards like 10 Gigabit Ethernet over twisted-pair cabling. It also enables you to certify links for other applications, such as video distribution over twisted pair cabling. No other tester on the market gives you this kind of future-proof investment while meeting current Cat 5e/6 specifications.
Manufacturers are integral to the testing decisions you make. To support their warranties, your certification tests must be performed with approved tools so you can ensure your customers’ complete satisfaction.
Fluke Networks has subjected the DTX Series testers to rigorous testing in the labs of leading wiring manufacturers. Click on the vendor logo below to display approval letter.
These Class F (Cat 7) certification endorsements complement the endorsements for certification of Cat 5e (Class D) and Cat 6 (Class E) links and channels. Click on the vendor name to see approval letter.
AMP Connect | BKS | CTI Netzwerksysteme |
Corning | Datwyler | Kerpen |
Siemon |
DTX CableAnalyzer Series significantly reduces your total time to certify.
Time is money. DTX saves you both.
The DTX CableAnalyzer Series delivers superior performance that can reduce your total certification costs by as much as 33% per year. This dramatic reduction is the result of not just faster testing, but also improved accuracy, superior diagnostics, longer battery life, simple user interface, and fast setup and reporting.
Cat 6 certification in 9 seconds
The DTX-1200 and DTX-1800 perform Cat 6 certification test in just 9 seconds – all in full compliance with the industry standards and with superior accuracy. That’s three times faster than existing testers. This incredible speed means you can test up to 170 more links in an eight hour shift.
Advanced Diagnostics –
Weight | 1 kg |
---|
Brand
Fluke Network
Welcome to Fluke Network Catalog
Reviews
There are no reviews yet.
Be the first to review “REPL CORD ONLY, 4MM BANANA & X-LG ALIGTR & TEST PRB”