The model MLS is a simple float switch designed for top mounting in open tanks or vessels. The MLS can be installed by bulkhead, screw-in or flange mounting. Control ranges up to 59 inches (1500mm) can be accommodated. This switch is designed for use as a reliable component in hydraulic units, boilers, magnetic cooling equipment, irrigation systems, etc. The model MLS is an economical solution for emptying and filling control. |
Specifications |
|
The model MLS consists of a miniature switch operated by a vertical rod and float mechanism. The float moves freely up and down the rod between two adjustable stops. As the liquid level rises, the float will rise until it reaches the upper stop. Increasing liquid level will then cause the float to apply upward pressure on the rod causing the miniature switch to activate. A spring mechanism attached to the rod is designed to provide mechanical hysteresis. Once the switch has activated, it requires a greater reduction in pressure before it returns to its original state. As a result of this design, when the liquid level falls and is no longer pressing on the upper stop, the miniature switch remains in the activated state. The miniature switch will not be deactivated until the liquid level falls below the lower stop. At that point the combined weight of the rod and float, acting against the spring, reduces the pressure on the miniature switch so that it deactivates. The stops on the rod can be adjusted to obtain desired switching levels, and the 10A rated, single pole, double throw (SPDT) switch makes the model MLS suitable for either empty or fill operations. |
Weight | 2 kg |
---|
Brand
APG
Welcome to APG Catalog
APG Automation SensorsAutomation Products Group, Inc. serves the process industries including oil and gas, vehicle services, vendor managed inventory, semiconductor, and vehicle services with a diversified offering of sensing technologies. Products include ultrasonic sensors, level, pressure sensing, data monitors, telemetry, and flow sensors and controls.
Automation Products Group, Inc. serves the process industries including oil and gas, vehicle services, vendor managed inventory, semiconductor, and vehicle services with a diversified offering of sensing technologies. Products include ultrasonic sensors, level, pressure sensing, data monitors, telemetry, and flow sensors and controls.
Formerly known as STI Automation and Lundahl Inc. In September 2006 Scientific Technologies, Inc. (STI) sold its Automation Products Group to Automation Products Group, Inc. (APG), a new company formed as a result of STI Safety Products Group’s recent merger with a subsidiary of Japan-based Omron Corporation. “This change will be completely transparent for Automation Products Group, Inc. customers, and they can expect the same level of high quality automation products and services that they have come to depend on over the years,” says Jim Vella, APG President. “Automation Products Group, Inc. will continue to be a single source for process and automation sensor solutions.”Reviews
There are no reviews yet.
Related products
Other
Other
Other
Other
Other
Other
Be the first to review “Switch assembly with terminal block”