WL750 ULTRASONIC LEVEL TRANSMITTERS
Continuous Ultrasonic Level Measurement
FEATURES:
|
On this page:
• Ultrasonic Level Transmitters Product Description |
Downloads (PDF):
• Ultrasonic Level Transmitters Brochure |
Ultrasonic Level Transmitters Product Description
The WL750 Ultrasonic Level Transmitters are perfect for short range, non-contact tank level measurements for a variety of liquids and solids. The Ultrasonic Level Transmitters feature an integrated LCD display and transmitter unit that provides a local level readout as well as the ability to send a signal to another device. The Ultrasonic Level Transmitters offer user-programmable settings and, in addition to the displayed values, feature an LED alarm light.
With the Ultrasonic Level Transmitter’s narrow 8 degree beam angle and slim 1.38 inches (35mm) chemical resistant process end, the WL750 is designed for accurate level measurement — even in relatively small tanks. A 3-bolt 2 ¾ inch flange is included with each Ultrasonic Level Transmitter for secure mounting. The WL750 Ultrasonic Level Transmitter’s power and signal cable assembly is connected to the display unit with a molded on, locking 5-pin plug. Choose from 16 ft (5m) or 33 ft (10m) cable assemblies, or purchase just the 5-pin plug alone to create longer cable runs.*
*NOTE: A cable assembly or 5-pin plug is required for the ultrasonic level transmitter.
Ultrasonic Level Transmitters Specifications
Ultrasonic Level Transmitter Electronics
Supply Voltage: 18 to 30 VDC
Power Consumption: < 3 Watts
Output: 4-20 mA, 2-10 V across 500 Ohm resistor to 0 V
Switching Values (S1 and S2): PNP or NPN selectable; 300 mA max load
Hysteresis: Adjustable; position depends on min. or max. setting
Display: Graphical LCD display; back-lit LED signaling lamp
Connection: M 12×1; 5-pole locking plug
Operational
Beam Angle: 8 degrees
Accuracy: ±0.2% full scale
Linearity Error: < 0.3% full scale
Temperature Error: 0.03% °C
Operating Temperature: 0°C to 70°C (32°F to 158°F)
Operating Pressure: Ambient
Environmental
Approval: IP67, CE
Mechanical
Wetted Materials: PET 30% GV, epoxy resin
Housing Materials: Stainless steel, tempered glass
Mounting: 3-bolt flange with set screw for adjustment
Weight: 0.8Lbs (363g)
Dimensions: 4” diameter x 8.5” long (10cm dia. x 21.6cm long)
Ultrasonic Level Transmitters Beam Diagram |
Ultrasonic Level Transmitters Wiring Diagram |
Be the first to review “WL750-4 Ultrasonic Level Sensor”